| Author |
Message |
alexr
Joined: Mar 25, 2019
Posts: 15
|
 Posted: Mar 27, 2019 1:46 AM Post subject: bh-threshold |
|
| I would like to make a simple design that uses a MIDI, a bandpass filter, and a threshold that rewards 90% of the time. I have been able to successfully adjust the MIDI nested design to what I need, but I am confused on how to edit the threshold nested design. Any quick tips? |
|
 |
jarek
Joined: Oct 22, 2007
Posts: 1098
|
| Posted: Mar 27, 2019 2:04 AM Post subject: |
|
The Threshold element alone can only be used for a manual threshold.
What you want is auto-threshold. Look in the BioEra example designs. You need to use Threshold together with TimeRatio. |
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Mar 27, 2019 11:17 PM Post subject: |
|
| Is this the proper way to make a threshold? Source->Bandpass filter->Threshold->MIDI and additionally Source->Bandpass filter->TimeRatio->Threshold(Thr) for the percentage the threshold is triggered. Sorry for all the questions, thanks again! |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
| Posted: Mar 27, 2019 11:21 PM Post subject: |
|
| Yes, it looks to me about right. You probably want to use Amplitude output of the filter and possibly some smoothing after that. |
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Mar 27, 2019 11:36 PM Post subject: |
|
| Great :) Smoothing as in averaging the amplitude? What elements do I need to do that? |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
| Posted: Mar 27, 2019 11:39 PM Post subject: |
|
| Yes. Look for TimeTransform. |
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Mar 27, 2019 11:55 PM Post subject: |
|
| Awesome, what time period do you recommend for the average? I’m just doing basic amplitude uptraining. |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
| Posted: Mar 28, 2019 12:16 AM Post subject: |
|
| There is no best value I know of. You need to experiment. I would start at about 0.25 second. |
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Mar 28, 2019 4:44 AM Post subject: |
|
| When I try connecting the source to an expression evaluator it adds all 16 channels of the device at once. Here’s a video: https://m.imgur.com/ETuIxad Any way around this? |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Mar 29, 2019 3:39 AM Post subject: |
|
| I can't reproduce it in the new design. It doesn't happen when I open it in the trial version. It also only happens on the first element that channel 1 is connected to. I'm not sure if that helps you identify it at all, but I can work around it and it shouldn't hinder me. Thank you for being so responsive! It's a stark contrast to the Bioexplorer support =) |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
| Posted: Mar 29, 2019 3:00 PM Post subject: |
|
If you can send the design you show in your video, I will try to reproduce it here. I do need a way to reproduce in order to fix it.
Email to send files to:
http://proatech.com/email.html |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
| Posted: Mar 30, 2019 12:12 AM Post subject: |
|
Thanks for your design.
This happens because you selected advanced property "Reconnect all outputs" in the DeviceSet element. |
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Apr 1, 2019 12:09 AM Post subject: |
|
| I can’t get my devices to run. (Q wiz and U Wiz) it’s finding the port fine, but nothing shows on the display. |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
|
|
alexr
Joined: Mar 25, 2019
Posts: 15
|
| Posted: Apr 1, 2019 10:11 PM Post subject: |
|
| Thank you! I was able to build the design around that and get it to work. Any thoughts on connecting inner tube to bioera? I see that there is a speed input on the somaticvision element, but nothing else? Any way to link more of the features to the feedback? Or a guide on inner tube and bioera? |
|
|
jarek
Joined: Oct 22, 2007
Posts: 1098
|
|
Main site
Forum
Email contact
Register
Log in
