Main siteMain site  ForumForum  ForumSearch  Private messageEmail contact  RegisterRegister  Log inLog in 
Topic: Dominant Frequency
Reply to topic
Author Message
Robert



Joined: Oct 9, 2006
Posts: 18

PostPosted: Aug 26, 2021 10:49 AM    Post subject: Dominant Frequency

Hi Jarek

After updating from 4.191 to 4.194 I am experiencing the following issue with the Dominant Frequency element:

1) After loading the designs that contain the Dominant Frequency element, the input is no longer connected and has changed to Scalar. Previously the input was Float.

2) When I connect the input to a Scalar source, the Dominate Frequency element generates no output and stays at zero.

Thanks in advance if you can check this.

Robert
jarek



Joined: Oct 22, 2007
Posts: 910

PostPosted: Aug 26, 2021 11:35 AM    Post subject:

Please try version 4.195.

I found a problem and fixed it. Hopefully there is nothing else.
Robert



Joined: Oct 9, 2006
Posts: 18

PostPosted: Aug 26, 2021 11:59 AM    Post subject:

4.195 works fine. No other problems found. Thanks a lot.

Robert
Reply to topic