Main siteMain site  ForumForum  ForumSearch  Private messageEmail contact  RegisterRegister  Log inLog in 
Topic: AutoGain to Manual
Reply to topic
Author Message
StabMe



Joined: Jul 29, 2016
Posts: 29

PostPosted: Nov 8, 2022 10:36 AM    Post subject: AutoGain to Manual

Jarek,

What would be the best strategy to use of one needs to create a design in which Polygraph element is guided by GainInteractor's Auto mode and then, when certain time passes, switches to 'manual' mode?

By manual i mean range (sensitivity), vertical min and vertical max are guided by sliders.

I tried using element interactor, which turns off GainInteractor by stopping the element. But when i do so, trace on the Polygraph also stops.
jarek



Joined: Oct 22, 2007
Posts: 970

PostPosted: Nov 8, 2022 12:44 PM    Post subject:

I have never tried anything like that. Those options are not designed to switch between them. I think it might work, but like everything in BioEra which uses a PropertySetter it needs experimentation.
StabMe



Joined: Jul 29, 2016
Posts: 29

PostPosted: Nov 9, 2022 5:22 AM    Post subject:

Experimentation is key indeed.

Ended up using a valve element that was setting minimum/maximum values for the slider and Polygraph as well as amplitude range. After set amount of time valve is closed and one is able to control the scalce with the help of a slider.
Reply to topic