Main siteMain site  ForumForum  ForumSearch  Private messageEmail contact  RegisterRegister  Log inLog in 
Topic: Release design issues
Reply to topic
Author Message
Gmartin3



Joined: Oct 19, 2021
Posts: 31

PostPosted: Nov 15, 2022 3:37 PM    Post subject: Release design issues

I have a relatively large design that I am trying to release. There should be one main folder and two sub-folders once the release is completed. One of the sub-folders does not transfer as it should. I have tried multiple times to do the release with the same result every time. Anyn suggestions greatly appreciated.
jarek



Joined: Oct 22, 2007
Posts: 970

PostPosted: Nov 15, 2022 3:56 PM    Post subject:

The "Release" option isn't perfect, it may not always include all files. It is usually fine for simple designs only.

For larger designs I would recommend doing this in part manually:
1. Start with the Release option, which should create "Release.zip" file.
2. Then open the Release.zip file with a zip program like WinZip.
3. Drag and drop all missing files to there. Make sure you preserve the structure of folders (for example put design files in "design" folder).

It is also possible to use this file for a simple installation. If you change the name to something with "install" for example MySoftware_install.zip, and then put it in main BioEraPro folder, then it will be automatically extracted during the next time BioEra is launched.
Gmartin3



Joined: Oct 19, 2021
Posts: 31

PostPosted: Nov 15, 2022 3:57 PM    Post subject:

Solved the problem User Error and fatigue I got some file paths mixed up
Gmartin3



Joined: Oct 19, 2021
Posts: 31

PostPosted: Nov 15, 2022 4:00 PM    Post subject:

Thanks Jarek I was in the middle of doing it manually when I discovered the problem I like the idea of the name for simple installation.
Reply to topic