Main siteMain site  ForumForum  ForumSearch  Private messageEmail contact  RegisterRegister  Log inLog in 
Topic: Timer issues and nested design problems in 4.223
Reply to topic
Author Message
Gmartin3



Joined: Oct 19, 2021
Posts: 70

PostPosted: Jan 23, 2024 11:46 PM    Post subject: Timer issues and nested design problems in 4.223

I recently updated to 4.223 from 4.214
Timers I had in my designs stopped working until I changed the properties. Stop on 0 and initial value 0 were there by default. Once I changed that they seemed to work in the main body of my designs. I opened nested design to make the changes in nested designs. That did not work. The properties reflected the changes but they did not function properly. I then loaded the nested designs and made and saved the changes. Usually when I do this and reload the full design it will begin to load then stop and restart.

In this instance that did not happen. The settings in the nested design were correct but they still did not function.
To make it work I had to reload the nested design, delete the timer, then put in a new timer. After that the base design opened and functioned properly.

I am not sure what is causing the problem. This makes updating designs very difficult
jarek



Joined: Oct 22, 2007
Posts: 1044

PostPosted: Jan 24, 2024 12:03 AM    Post subject:

I can't explain this behavior without seeing a snippet or a way to reproduce it.

There was no change in how the nested designs are loaded or reloaded.

The Timer element did change slightly, but not its properties. Not sure, maybe something had a larger impact than intended. Sorry about that.
Reply to topic