Main site  Forum  Search

Email contact  Register  Log in

Topic: changing range on oscilloscope.

Author	Message
Gmartin3 Joined: Oct 19, 2021 Posts: 78	Posted: Sep 9, 2024 8:54 PM    Post subject: changing range on oscilloscope. I have a synchrony design set up. I want to view the synchrony in the oscilloscope. I have calculated the synchrony value to a range of 180. In the oscilloscope it looks right. If I use the advanced properties to set the vertical range to 100-200 so as to see the value better the coherence value goes out of range, It gives values of over 200. The same thin happens with a bar display. Set the range from 100 to 200 and suddenly the value exceeds 180. I have a numeric display in the design and it read the proper synchrony value Any help is greatly appreciated.
jarek Joined: Oct 22, 2007 Posts: 1049	Posted: Sep 12, 2024 3:17 PM    Post subject: The advanced settings can be tricky, some of them only apply to the scale, not the signal range, make sure you use the "Amplitude Max" and "Amplitude Min" settings, ale make sure other settings there (like Offset or Axis) are not set. If it still doesn't work, feel free to send a snippet.
Gmartin3 Joined: Oct 19, 2021 Posts: 78	Posted: Sep 12, 2024 8:14 PM    Post subject: Thanks Jarek