Forum

pierpaolo59 · Joined: Sep 12, 2024 Posts: 3

Hi,
I would know whether Bioera really supports Bitalino revolution before purchasing. (old version with RJ ports). I tested with the trial version 4.1 downloaded from your site but any signal appear on the oscilloscope even using the driver. I did not find much information in the manual on how to connect the device other than loading the appropriate driver. The program asks for several specifications (for example parity, data flow etc. and many others). It is also not clear whether the device can be directly connected or whether it is necessary to start Biosignals (the software that manages Bitalino) at the same time. It is also not clear whether I can use the same dongle with which I use Bitalino (correctly associated) or if some specific type is required. Do you know anyone who uses Bioera with that device who can give me advice on this?

jarek · Joined: Oct 22, 2007 Posts: 1049

Hi,

we tested Bitalino (r)evolution without RJ ports, so I am not sure about those. That would be a better question for Bitalino support.

Bitalino is using classic bluetooth (not the same as BLE), which needs to be configured (paired) in Windows. After this is complete you should see new serial ports created in Device Manager.

This BioEra example needs to be reconfigured for this port (change the port number in SerialPort element):

http://proatech.com/design/bitalino.bpd

Biosignals is not required (better to close it).