Main site  Forum  Search

Email contact  Register  Log in

Topic: Synchronizer to Polygraph automatic Out/In connections

Author	Message
EMebane Joined: Apr 15, 2019 Posts: 124	Posted: Apr 20, 2026 2:30 AM    Post subject: Synchronizer to Polygraph automatic Out/In connections I have a Synchronizer connected to a Polygraph. There are 2 connections made. When I add a third connection to the Synchronizer the third connection to the Polygraph is automatically connected, but I get a red x error underneath it. Restarting the design doesn't clear the X. Removing that third connection to the Synchronizer removes the connection to the Polygraph, but the X doesn't go away until I restart the design. The elements leading into each connection of the Synchronizer are TimeTransforms. In an isolated test this doesn't happen. In fact, the automatic connection of outputs from the Synchronizer and Inputs of the Polygraph doesn't happen.
jarek Joined: Oct 22, 2007 Posts: 1087	Posted: Apr 20, 2026 3:36 PM    Post subject: The Synchronizer has a property "Auto-connect output". That is probably you see different behavior. It is cleared by default (this is the recommended setting).